2.4Ghz WALKERA QR-W100 F.P.V. DRONE QUADCOPTER RTF BNF (NO TX)
Walkera's latest 100 size Quadcopter which is a space cruiser looking quad that can be widely use in iphone,DEVO radio and DEVO F4/7 radios too.
This Quadcopter comes with a Real Time First Person View (FPV) High Definition Camera underneath the drone quadcopter belly. The FPV Camera
can be viewed using the Apple iPhone or Apple Tablet when the WiFi is enabled and used in conjunction with the Walkera Remote App. With the
Remote App downloaded, the Apple iPhone can view in FPV and also fly this quadcopter. The Gravity Sensor will also work.
Don't have an iPhone? This Quadcopter can also be flown using the DEVO 4, DEVO F4, DEVO 7, DEVO F7, or higher TX. For example, If you are
using the DEVO 4 to fly, you can then also use the Apple iPhone to View via Wi-Fi and the Walkera Remote App.
The Quadcopter features an easy replace motors as they are modular in design. Thus making it easy to replace in the field if one of the motors fail.
The low cost structure and low spare parts count make this quadcopter inexpensive and easy to repair.
Flight time:5--7 mins
1X QR W100
1X CD and manual
1X battery 3.7V 600mAh
1X GA006 Charger
"The place to shop for modifications to your R/C Electric Helicopter"
FAST SHIPPING FOR
Note to all Customers: Currently we are ONLY
shipping helicopter kits within the U.S.A. All
foreign helicopter kit orders should inquire with an
e-mail to: Sales@rtf-heli.com
What’s Needed for Flight:
(1) Apple iPhone 4, 4s, or higher with Walkera Remote App. or Walkera DEVO 4, 7, or higher Transmitter
A Note on Setup:
When you bind your Walkera 2.4GHz transmitter to your current BNF Walkera model, please be aware that you will need
to perform proper electronic setups within the transmitter, such as servo reversing, end point adjustments, pitch curves,
throttle curves, and other such functions. Proper mechanical adjustments may need to be performed to make sure the
BNF Walkera helicopter is performing as it should, per the stated manual. We test fly before shipping out to you for
Piece of Mind (POM).
Before your 1st flight, always be sure to do a proper “pre-flight” check to make sure your kit is flight worthy. Be sure to check all servo
movements, be certain servos are moving in the proper direction, and look over the helicopter for any flaws, damage or otherwise. If a part is
loose, be sure proper tools are used to tighten said part, and be sure to use thread locking compound on all metal to metal parts.
Before flight, remove the main rotor blades & tail rotor blades and perform an initial power up of the helicopter to make sure the motor is
functioning as it should. Once confirmed the motor is functioning, power off the helicopter and attach main rotor blades & tail rotor blades,
making sure they are properly tightened.
For the 1st flight, be sure to fly in an open area free of obstacles with low wind. If any drifting is seen, use trims to cancel this out, or mechanical
adjustments via the rotor system. In short, proper setup depends upon you, as all RTF helicopters require correct setup for the best flight
Walkera QR W100 UFO*1
Extra Propellers *4 pcs