2.4Ghz WALKERA QR-X350 GPS FPV 6CH RC DRONE QUADCOPTER ARTF 2.4GHz W/O TX/CHARGER/LIPO BATTERY
.
Please read our Store Policy and Privacy Policy.   Copyright © 2009 - 2015  RTF-HELI.COM
RTF-HELI.COM
"The place to shop for modifications to your R/C Electric Helicopter"
Solution Graphics
INTERNATIONAL ORDERS
WELCOMED

FAST SHIPPING FOR
U.S.ORDERS
WALKERA HELICOPTERS

Note to all Customers:  Currently we are ONLY
shipping helicopter kits within the U.S.A.  All  
foreign helicopter kit orders should inquire with an
e-mail to:
Sales@rtf-heli.com
.

A Note on Setup:

When you bind your Walkera 2.4GHz transmitter to your current BNF Walkera model, please be aware that you will need
to perform proper electronic setups within the transmitter, such as servo reversing, end point adjustments, pitch curves,
throttle curves, and other such functions. Proper mechanical adjustments may need to be performed to make sure the
BNF Walkera helicopter is performing as it should, per the stated manual.  We test fly before shipping out to you for
Piece of Mind (POM).

Before your 1st flight, always be sure to do a proper “pre-flight” check to make sure your kit is flight worthy. Be sure to check all servo
movements, be certain servos are moving in the proper direction, and look over  the helicopter for any flaws, damage or otherwise. If a part is
loose, be sure proper tools are used to tighten said part, and be sure to use thread locking compound on all metal to metal parts.

Before flight, remove the main rotor blades & tail rotor blades and perform an initial power up of the helicopter to make sure the motor is
functioning as it should. Once confirmed the motor is functioning, power off the helicopter and attach main rotor blades & tail rotor blades,
making sure they are properly tightened.

For the 1st flight, be sure to fly in an open area free of obstacles with low wind. If any drifting is seen, use trims to cancel this out, or mechanical
adjustments via the rotor system. In short, proper setup depends upon you, as all RTF helicopters require correct setup for the best flight
characteristics.

Package Includes:

Walkera QR X350*1
Extra Propellers *2 pcs
CD Manual*1

REQUIRES 11.1 VOLT 2,200MAH 3S LIPO BATTERY WITH 3.5MM BANANA CONNECTOR
REQUIRES DEVO 7 OR DEVO F7 TX
Contact US (Click HERE )
.
.
..
.
.
OTHER STUFF
HELICOPTER MODS
HELICOPTER ACCESSORIES
WALKERA R/C
..
ALIGN TREX R/C